JustBrits@aol.com wrote:
>
> Steve:
>
> First - take a 12VDC test light, hold tip on switch to starter lug, DO NOT
> turn ign switch on, push plunger - if light come on switch is good. CHECK
> ground strap from engine to chassis. If these OK remove starter and bench
> test.
> If bench test is bad to poor just take to motor service shop.
>
> Regards,
>
> Ed
Thank you, Ed. I am always amazed at the assistance and kindness one
receives from those fine folks on this list. I am 48 years young and
when a child it was common place for most people to be courtious and
helpful. Nowadays it is unusual for people to be such...but not MG
people. We are simply the best. thank you all. I will start sorting
things out today.
steve
52 TD
|