Rich Mason wrote:
>
> I recently installed GT V-8 A-arm bushings in my '73B and found the bolt
> securing the wishbone arms to the king pin to be stuck on the right side. I
> presume the bolt is rusted to the spacer (distance tube). The seals
> (probably original) broke off in my hand while trying to free the bolt - so
> I have to disassemble it again to install new seals as a minimum (once I
> order the parts I need). Any tried and proven techniques for freeing this
> up short of pulling the king pin and beating the bolt into submission?
>
I've had to hacksaw through the bolt both sides of the king pion in the past.
PaulH
|