Blair Engle wrote:
>
> Hi Steve...
> I only check my E mail once a day, so I am frequently slow with responses.
> How have you made out with the grease fitting. I see you had lots of help.
> I am sure you found the end of the shaft with the circlip on it, on the
> outside of the l/h frame rail. If you have to drill out the plug and tap
> new threads, you are going to get metal chips in the hole. They must be
> cleaned out before you can install the fitting and put in grease.
>
> Have you decided how to solve your problem?
>
> Press on regardless,
>
> Blair
> ______________________________________________________________
> Blair Engle engle@phy.fsu.edu
Blair,
I ordered a fitting and await its arrival. I will then determine how to
tackle the situation.
Thanks,
Steve
|