I ran the low pressure square pump on my 215 for 40k miles including
regular autocrossing. It was still working fine when I sold the car.
James Nazarian
On Oct 15, 2008, at 11:45 AM, "Dodd, Kelvin" <doddk@mossmotors.com>
wrote:
> Rick:
>
> The original SU pump works just fine for a carbureted 3.5L. I've gone
> the same route of multiple different after market pumps, but have come
> back to the original. Just a thought.
>
>
> The kicker for me was looking at a UK built V8 powered Group B Rally
> MG
> Metro. They had pulled out the Rover derived V6 and installed a V8
> in a
> very professional manner. With all of the pumps available, they
> chose a
> good ole' SU one to keep it fed.
>
>
>
>
>
> Kelvin Dodd
>
>> -----Original Message-----
>> From: mgb-v8-bounces@autox.team.net
>> [mailto:mgb-v8-bounces@autox.team.net] On Behalf Of Rick Huber
>> Sent: Tuesday, October 14, 2008 6:38 PM
>> To: mgb-v8@autox.team.net
>> Subject: [Mgb-v8] Fuel Pump Woes
>>
>> Hi V8ers,
>> I have a 75 MGB Rover 3.5 V8. I've been running the Borg
>> Warner EP-10 fuel pump for 9 years, mounted on the underside
>> of the panel just in front of the gas tank, just above the
>> rear axle, so fuel pump above the tank. In July, the fuel
>> pump quit. I called several parts stores looking for the BW
>> EP-10, which is not made anymore, but Napa cross referenced
>> it to something they carried. I don't have the box anymore,
>> but the label on the pump is Carter with two numbers,
>> P61296S, and 08C04A. Swapped pumps and the new one lasted
>> about 50 miles. Checked everything in the system before
>> determining that indeed the brand new fuel pump was bad,
>> wouldn't even pump gas out of a jar on the floor of the
>> garage after removing it. Took it back to Napa and got
>> another new one, assuming the pump was bad. Changed inlet
>> hose, connections, blew back into the tank, put on another
>> upstream filter.
>> Second Napa pump lasted about 300 miles, one drive past a
>> weekend trip with the club from Baton Rouge to Natchez for
>> the Natchez/Vidalia car show.
>> Talked to a few people, and someone suggested a different
>> brand, different store, so I went to Auto Zone and got the
>> Airtex E8016S. Got home and took it out of the box, and it
>> looks identical to the Carter.
>>
>> I've put it on the car, but I have a feeling it's only going
>> to last a very short time, so I'm ready to try something
>> different. Is the problem that these new pumps won't suck
>> gas out of the tank when mounted above the tank?
>> Can I get a different pump that I can mount in the same
>> location that will suck gas out of the tank? I can change
>> the mounting location of the Airtex pump, but that sounds
>> like a pain if I could just swap the pump again in the same
>> location. I've heard of the little square pumps - someone
>> said to get the low pressure version for a carburetted car.
>> Anybody with a similar experience? Any solutions?
>>
>> Thanks,
>>
>> Rick Huber
>> Safety Faster with a V8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Mgb-v8 mailing list
>
> You are subscribed as james.nazarian@gmail.com
>
> Mgb-v8@autox.team.net
> http://autox.team.net/mailman/listinfo/mgb-v8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgb-v8 mailing list
Mgb-v8@autox.team.net
http://autox.team.net/mailman/listinfo/mgb-v8
|