Excuse me, but all the postings I saw clearly stated NO
PULLEY CHANGE at all was necessary when the pump was modified
according to the side by side comparison picture. If the pulley was
actually changed, then I have no idea where this question even
originated. I can only guess there must have been some careless
readings by somebody of someone else's explanations.
I said I would shut up. This time I mean it.
Cheers,
Dave K.
-----------------------------------------------------------------
>David,
>
>Let me help you with that mud. ;)
>
>The stock water pump with our setup has a pulley with a lot of
>offset toward the water pump. The only pulley that has to be changed
>is the water pump pulley.
>
>Here's a pic of Barrie's engine with the shortened pump:
>
>http://www.britishv8.org/MG/BarrieRobinson/BarrieRobinson-H.jpg
>
>Compare that with the offset on Mike Moor's water pump pulley:
>
>http://www.britishv8.org/MG/MikelMoor/MikelMoor-H.JPG
>
>Carl Floyd
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgb-v8 mailing list
Mgb-v8@autox.team.net
http://autox.team.net/mailman/listinfo/mgb-v8
|
