In a message dated 7/27/2005 8:09:33 P.M. Eastern Daylight Time,
mg.kirkman@verizon.net writes:
I am finalizing my replacement of my gauges. The oil gauge has a connection
from the sender, a black ground, a lamp, and a wire to the ignition switch.
I don't have any extra light green/green wires to the ignition switch. I
removed the wires from the voltage stabilizer and planned on connecting them
to each other, thus bypassing the voltage stabilizer. What color is the
wire to the ignition switch (light green/green or plain green)? There are
double green wires to the speedo and the alternator. Can I split them?
What wire can I connect to the ignition switch connection on my oil pressure
gauge?
Dave,
Connect the "ignition" lead for the gauge to any convenient green wire, or
to the light green/green wire (after bypassing the voltage stabilizer), which
ever is most convenient.
Have you downloaded the color wiring diagrams yet? Go to
_http://www.advanceautowire.com_ (http://www.advanceautowire.com) and click
on the "stock
schematics" button. These will help you figure out the wiring.
Dan
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|