Either you don't have a GM 4 speed bellhousing or you don't have the tanny
you think you do. All GM 4 & 5 speed trannys have the same bolt pattern.
Look for a Ford logo on the T5. :)
Like Jim said, the BOP/Rover engine take a very specific bellhousing (if
that is the engine you are using).
Carl F.
----- Original Message -----
From: "Automobile Information" <autoinfo@comcast.net>
To: <mgb-v8@autox.team.net>
Sent: Saturday, April 17, 2004 5:27 PM
Subject: trans , bellhousing questions
> I have what is supposed to be a 5-speed T5 out of a 1990 Camaro with a 305
> V8. I bought a GM bellhousing that has the two different size mounting
> options ( 4 holes and four threaded holes). None of these line up with my
> T5. the bellhousing will not even reach the lower mounting holes. Any
> suggestions as to what I have. Tags on the trans are unreadable but, I
> believe it to be WC T5. If anyone can help I can send photos.
>
> Mike
> Denver, CO
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|