mgb-v8
[Top] [All Lists]

RE: Fodr 5.0 swap

To: mgb-v8@autox.team.net
Subject: RE: Fodr 5.0 swap
From: MGV8VT@aol.com
Date: Wed, 24 Mar 2004 07:45:09 EST
Reply-to: MGV8VT@aol.com
Sender: owner-mgb-v8@autox.team.net
        Front crossmember is not a big deal. I originally did mine with the 
Bronco pan and cut both sides of the x-member, but have since fitted a Canton 
pan and it would have required very minimal cutting on only the left side. It 
is the first thing you must do but it pales in comparison to the rest.... 
headers, motor mounts, cooling, etc.
        Dale

///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///


<Prev in Thread] Current Thread [Next in Thread>