To: | "Larry" <list@marketvalue.net>, "'MGBV8'" <mgb-v8@autox.team.net> |
---|---|
Subject: | RE: Lower radiator hose rub issue. |
From: | Barrie Robinson <barrier@bconnex.net> |
Date: | Wed, 09 Jul 2003 10:02:50 -0700 |
In-reply-to: | <000001c345ca$b6ca2fc0$6401a8c0@LARRY> |
References: | <000f01c345c6$07c44410$220110ac@HOME> |
Reply-to: | Barrie Robinson <barrier@bconnex.net> |
Sender: | owner-mgb-v8@autox.team.net |
Blast you fellows, you are far too fast! Just when I had an answer to
someone's problem you get there before me. Just shows you how damn
responsive this list is. What would we do without it !! Incidentally, I have used chromed plumbing type pipes for all sorts on applications - including stand-offs for the radiator. And a Pampers box makes an excellent rain shield for the horns (nothing worse than a wet horn!) At 09:32 PM 7/8/2003 -0600, Larry wrote: RegardsI used a chrome plated brass pipe frequently found in the kitchen plumbing section of my local 'big box' store. It slipped right inside the hose. And yes, I think it was suggested to me by Jim Stuart, thanks Jim. Larry Hoy > -----Original Message----- > From: owner-mgb-v8@autox.team.net > [mailto:owner-mgb-v8@autox.team.net] On Behalf Of Jim Stuart > Sent: Tuesday, July 08, 2003 8:59 PM > To: 'Jim Miller'; 'MGBV8' > Subject: RE: Lower radiator hose rub issue. > > > Use a piece of 1 1/2" stainless pipe in the middle of the > hose connected with hose clamps. The smaller O.D. will > provide the clearance. > > Jim Stuart > > -----Original Message----- > From: owner-mgb-v8@autox.team.net > [mailto:owner-mgb-v8@autox.team.net]On > Behalf Of Jim Miller > > Sent: Tuesday, July 08, 2003 10:15 PM > To: MGBV8 > Subject: Lower radiator hose rub issue. > > > I am using a D&D radiator and swivel oil filter > adapter on a 78B and having trouble with the swivel > filter adapter rubbing on the lower radiator hose. I > had rigged up a shield several years ago, which worked > fine for the last few years. Was looking it over > closely tonight and noticed that the swivel filter > adapter has rubbed through the shield and just about > through the hose. What is the trick in getting the > lower hose through this tight spot? > > Jim Miller > 78B Buick 215 Barrie Barrie Robinson barrier@bconnex.net /// /// mgb-v8@autox.team.net mailing list /// Send admin requests to majordomo@autox.team.net /// Send list postings to mgb-v8@autox.team.net /// Edit your replies! If they include this trailer, they will NOT be sent. /// |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Lower radiator hose rub issue., Telewest \(PH\) |
---|---|
Next by Date: | Re: Lower radiator hose rub issue., Barrie Robinson |
Previous by Thread: | RE: Lower radiator hose rub issue., Larry |
Next by Thread: | Re: Lower radiator hose rub issue., Telewest \(PH\) |
Indexes: | [Date] [Thread] [Top] [All Lists] |