mgb-v8
[Top] [All Lists]

[Fwd: Re: intake manifold]

To: MGB-v8 list <mgb-v8@autox.team.net>
Subject: [Fwd: Re: intake manifold]
From: James Jewell <m1garandusa@netscape.net>
Date: Thu, 02 May 2002 10:13:39 -0400
Reply-to: James Jewell <m1garandusa@netscape.net>
Sender: owner-mgb-v8@autox.team.net
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4) Gecko/20011128 Netscape6/6.2.1
So how much travel does a typical driveshaft have, with respect to 
length change at the splines?  With the geometry in the B, does the 
drive shaft shorten, or lengthen when the rear axle moves up?  I assume 
that there is not enough travel to try moving the engine back as 
described below with the driveshaft in place?
James J. (different James)

///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///


<Prev in Thread] Current Thread [Next in Thread>