mgb-v8
[Top] [All Lists]

Re: Electrical Help Needed

To: "Glenn" <g_wakefield@yahoo.com>, <mgb-v8@autox.team.net>
Subject: Re: Electrical Help Needed
From: <paul.hunt1@virgin.net>
Date: Mon, 2 Jul 2001 21:10:17 +0100
References: <20010627015602.52591.qmail@web11401.mail.yahoo.com>
Reply-to: <paul.hunt1@virgin.net>
Sender: owner-mgb-v8@autox.team.net
Nothing to with why it won't start but 9v on the coil cranking, but 11v on
the coil cranking with a bypass wire going back to the battery, shows bad
connections somewhere in the heavy current circuit.

You'll only get 14v at the coil when the engine is finally running and the
alt charging.

PaulH.

----- Original Message -----
From: Glenn <g_wakefield@yahoo.com>
To: <mgb-v8@autox.team.net>
Sent: Wednesday, June 27, 2001 2:56 AM
Subject: Electrical Help Needed


> ...  It would not restart.  I'm currently
> using a Petronix Ignitor.  Have not had any problems
> with it.  I'm getting 11.5 on the plus side of the
> coil with key off, about 9.0 with the car cranking.
> The MSD coil is extremely hot.  I ran a wire from the
> battery to the + side of the coil, and got about 11V
> with the car cranking. Not difference.

///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///


<Prev in Thread] Current Thread [Next in Thread>
  • Re: Electrical Help Needed, paul.hunt1 <=