paul, we also sell k & n have all the measurement data. ted
Paul MacDonald wrote:
> Here are a couple of sites where you can get a bunch of information on K&N.
> I have fit them to my carbed TR8 (zenith -stromberg).
>
> This first site will get you into K&N UK
> http://www.knfilters.co.uk/kn_hi/products.htm
>
> Various others sub sites will get you dimension drawings of most of their
> filters
>
> This one for instance will give you a dimension drawing of the filter for
> the carbed Z-Stromberg (RC-2600)which needs adapters etc. -- long story
> http://www.knfilters.co.uk/kn_hi/taperuni.htm
>
> The US site ( which does not understand the UK part numbers, except for some
> of the universal ones)
> http://www.knfilters.com/
>
> Paul MacDonald
> K&Ned TR8
>
> > -----Original Message-----
> > From: Gary Moles [SMTP:morgannz@xtra.co.nz]
> > Sent: Sunday, November 12, 2000 2:21 AM
> > To: mgb-v8@autox.team.net
> > Subject: K&N Filters
> >
> > Does anyone know if there is a standard "Twin" K&N filter that fits across
> > the back of the rear-facing carb inlets of the SUs fitted to the Rover V8
> > motor. This would be in place of the long intakes/filter used by MG on the
> > standard BGT V8.
> > best regards
> > Gary Moles
> > 1976 MG BGT V8
> >
--
Ted Schumacher
TS Imported Automotive
404 Basinger Rd.
Pandora, Ohio, USA 45877
Ph. 800/543-6648 USA/Canada FAX 419/384-3272 24 hour
Ph. 419/384-3022 - tech./general information
Web page http://www.tsimportedautomotive.com
New-Used-Rebuilt-NOS-Performance British car parts.
200 - 300 parts cars in our British-only salvage yard.
|