Herb,
Something is preventing the main jet from closing. Either is piece of dirt,
or the needle is corroded. Many people replace them with Grose jets, they
use a glass ball instead of a brass cone.
Blair
53 TD
78 B
----- Original Message -----
From: "herb strachman" <hstrachman@yahoo.com>
To: "MG" <Mg-t@autox.team.net>
Sent: Monday, September 01, 2008 3:30 PM
Subject: [Mg-t] leaking carbs
> Hi,
>
> When I turn on my ignition switch I have gasoline flowing from the
> carburetors over flow pipes. This happens without starting the car. Any
> suggestions.
>
> Thanks,
>
> Herb
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|