[Top] [All Lists]

RE: THANKS: brake lights staying on

To: <>
Subject: RE: THANKS: brake lights staying on
From: "James Fischer" <>
Date: Thu, 4 Jan 2007 14:17:37 -0500
> Just in case I have to take the master cylinder out  
> - is it possible to remove it from underneath

Easy enough to do on a 52 TD:

I just unscrewed the hydraulic line, and then unbolted
the two bolts that hold the master cylinder to the
frame.  The push-rod will slide out as you remove
the master cylinder towards the rear of the car, and 
can be left attached to the linkage in the nefarious box.

///  unsubscribe/change address requests to  or try
///  Archives at

<Prev in Thread] Current Thread [Next in Thread>