mg-t
[Top] [All Lists]

RE: exhaust tail pipe orientation

To: "'Douglas Ormrod'" <Douglas.Ormrod@neurological.org.nz>,
Subject: RE: exhaust tail pipe orientation
From: Jesús Benajes <jbenajes@mot.upv.es>
Date: Tue, 3 Oct 2006 09:28:28 +0200
I have recently installed a Falcon SS exhaust line (not from Moss) and as
far as I can remember the long straight portion of the tail pipe attached to
the silencer. I had to rotate the pipe and the silencer, until the short
straight section remained more or less horizontal.

Jesus

53 TD



-----Mensaje original-----
De: owner-mg-t@autox.team.net [mailto:owner-mg-t@autox.team.net] En nombre
de Douglas Ormrod
Enviado el: lunes, 02 de octubre de 2006 22:51
Para: mg-t@autox.team.net
Asunto: exhaust tail pipe orientation

Hi T typers

I am fitting a MOSS stainless steel exhaust  system to my TD. The long tail
pipe section has a couple of gentle bends in it nearer one end than the
other
- so there is a long and a short straight section at either end. My question
is which way round does it go? Does the short staight end or long straight
end attach to the silencer?

Cheers

Douglas

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t

<Prev in Thread] Current Thread [Next in Thread>