mg-t
[Top] [All Lists]

Re: Oil Priming.

To: crownwhl@sover.net, mg-t@autox.team.net
Subject: Re: Oil Priming.
From: TATERRY@aol.com
Date: Mon, 16 Jan 2006 14:56:51 EST
In a message dated 1/16/2006 11:45:18 AM Pacific Standard Time, 
crownwhl@sover.net writes:


> Oil pressure is instantaneous to about 55 psi. Then 
> after 'he' warms up it drops to about 45 - 50 psi at running RPM that 
> were it stays there.  At idle (500-600  RPM) the oil pressure will drop 
> to about 20 psi. 
> Not being that conversant with the system, could there be some kind 
> blockage in the sump or lines?
> 

This sound completely normal to me..........I'm surprised it doesn't drop 
lower than that at 500 rpm but if it did, that wouldn't be a problem either.
Terry

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t


<Prev in Thread] Current Thread [Next in Thread>