Scott,
I was able to undo the nut by using a 32 mm socket and a long enough
combination of breaker bar plus steel tube. The problem may be avoiding the
wheel to turn... but the socket shouldn't be damaged.
Regards.
Jesus
53 TD (under full restoration)
-----Mensaje original-----
De: owner-mg-t@autox.team.net [mailto:owner-mg-t@autox.team.net] En nombre
de S. Allen
Enviado el: miircoles, 01 de septiembre de 2004 15:35
Para: mg-t@autox.team.net
Asunto: Nut Size?
Hi,
I'm having a problem getting the nut on the rear hub to come off. The
next step is to get a pipe to attach to the breaker bar and if that
doesn't work I'll apply some heat to it...
Anyway, I don't want to damage the nut and the socket I'm currently
using, (32mm) while a good fit, isn't perfect.
Does anyone on the list know the exact nut size?
Thanks in advance,
Scott
52 TD
74 1/2 BGT
[demime 0.99d.1 removed an attachment of type application/ms-tnef which had a
name of winmail.dat]
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|