mg-t
[Top] [All Lists]

Re: Generator Field Polarity?

To: "Parkinson,Ron" <RParkinson@AMESTEXTILE.com>
Subject: Re: Generator Field Polarity?
From: Dave & Liz DuBois <ddubois@sinclair.net>
Date: Mon, 09 Aug 2004 09:42:26 -0700
Ron,

I don't know how you are going about flashing the field windings, but 
the following method is what I have used for many years to good affect.  
Remove the wire from the field terminal of the generator and using a 
piece of wire that will reach from the battery's negative terminal to 
the field terminal, wipe it across the field terminal sufficiently to 
cause sparking.  I normally do this a couple of times, then reassemble 
everything.  By going directly fromt eh battery to the field terminal of 
the generator, it will eliminate any chance that there is a sneak path 
to disrupt the proceedure.

Good luck,
Dave

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t


<Prev in Thread] Current Thread [Next in Thread>