Dave,
We know you meant 100 C.
Blair
----- Original Message -----
From: "Dave & Liz DuBois" <ddubois@sinclair.net>
To: "Mike Eldred" <redscirocco@hotmail.com>
Cc: <mg-t@autox.team.net>
Sent: Saturday, July 10, 2004 2:19 PM
Subject: Re: Temp gage
> Mike,
>
> Testing will require draining the coolant a bit to get it below the
> level of the temperature sender. Once that is done, remove the sender
> and route it to a pan (or coffee can) full of water and place it on a
> camp stove. Heat the water to boiling. The gauge should read 1000C.
> If it doesn't, then you will need to send the gauge to Nisonger's
> <http://www.nisonger.com/> or John Wolfe Co.
> <http://www.tempman.qpg.com> for repair. It is possible that the
> capaliary tube wound up being cracked and lost all the working fluid.
>
> Good luck,
> Dave
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|