mg-t
[Top] [All Lists]

Floor Boards

To: <mg-t@autox.team.net>
Subject: Floor Boards
From: "David Tinker" <davidtinker@xpag.co.uk>
Date: Thu, 3 May 2001 21:55:47 +0100
Hi Everybody,
I am in the process of sorting out the floor boards on my TF restoration. I
have only one floorboard and its for the passenger side ( RHD Car ). Can
someone confirm that the basic outside shape is common to each side of the
car ( except for the various recesses machined on the underside ). Also the
plywood  thickness, mine is around 10mm.

Does someone have a picture or sketch of the firewall plate ( the sloping
flat metal plate that transmission cover bolts to ). Mine appears to have a
piece cut out of it at a point underneath the starter bendix spring and
where the forward edge of the  floorboard ( should ) be supported.

Any info greatly appreciated.

Regards

David Tinker. Wales UK

///
///  mg-t@autox.team.net mailing list
///


<Prev in Thread] Current Thread [Next in Thread>