Current fan belt supplied by Moss Motors is 17 x 925. Fits fine, both
pulley groove angle is correct, and length is correct. As long as you
can put the fan belt onto the generator pulley, WITHOUT removing the
adjuster bolt from the generator, the length is correct. Not too much
tension should be taken with the belt; a 1" deflection is fine. There is
no A/C compressor, no altenator, power steering pump, or other high
demand device being drien by the belt. If the adjuster bolt is midway in
the adjuster link slotted hole, then the length is correct.
John Seim
VintageMG.com
///
/// mg-t@autox.team.net mailing list
///
|