The blank engine tags and the rivets are available from Moss Europe part no
408-770, the rivet 325-230. Do not know where you are located but if in the
states you have a Moss there. Any difficulty let me know.
Regards
David Tinker
----- Original Message -----
From: "Wiedemeyer" <boxweed@thebest.net>
To: "David Tinker" <david.tinker@virgin.net>
Cc: <MG-t@autox.team.net>
Sent: Saturday, August 12, 2000 3:06 PM
Subject: Re: MGTD Engine Number
> Where can you get the new octagon-shaped engine plates?
>
> Bob
>
> >New engine plates are available.
> >Hope this helps
> >
> >David Tinker
> >51 TD
> >54 TF
> >E type ser1
> >----- Original Message -----
> >From: "Bill Loubiere" <loubiere@earthlink.net>
> >To: <mg-t@autox.team.net>
> >Sent: Saturday, August 12, 2000 1:20 PM
> >Subject: MGTD Engine Number
> >
> >
> >> I am considering buying a MGTD and need some help on understanding the
> >> location of the engine number.
> >>
> >> I have found the car and engine number on the plate on the firewall.
> What
> >I
> >> do not understand is how to check the number on the engine to determine
> if
> >> they match.
> >>
> >> The fire wall number is XPAG TD2 20---.
> >>
> >> A number on the engine head is REF118. There may be a number on what
> >looks
> >> like a flat part of the block (right side). There is a screw in the
> >middle
> >> of that flat section buy no plate.
> >>
> >> Where should the engine number be located?
> >>
> >> Any help would be appreciated.
> >>
> >> Bill Loubiere
> >>
> >>
>
|