mg-t
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Source and size of TF screws, bolts & taps

from [JustBrits] [Permanent Link][Original]
To: yd3@nvc.net, mg-t@autox.team.net
Subject: Re: Source and size of TF screws, bolts & taps
From: JustBrits@aol.com
Date: Mon, 10 Apr 2000 09:54:45 EDT 
In a message dated 04/09/2000 9:29:08 PM Central Daylight Time, yd3@nvc.net 
writes:

<< Found the differences in the angles between the vees. >>

Thank you Sir.  Saved me another trip to shop<G>!

Cheers........

        Ed
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  RE: Anglo Parts, Bullwinkle
Next by Date:  Re: Antenna, TATERRY
Previous by Thread:  RE: Source and size of TF screws, bolts & taps, Lew Palmer
Next by Thread:  Re: XPAG Rocker bushes, david.tinker
Indexes:  [Date] [Thread] [Top] [All Lists]