Re: New to the list

["STL-QB@MSN.COM" <STL-QB@email.msn.com>]

Welcome to the list Dick,
The front brake drums will require a puller to remove.  The bearing is very
snug on both the spindle and in the drum.  Depending on which part has the
tightest fit with the bearing, it may stay on the spindle along with the
grease seal or the seal and bearing both might come off complete with the
drum.  I have seen the drum come off both ways.
Whatever you do, dont try to beat the drum off the spindle with a hammer.
Jim Merz  NEMGTR #896
53 MG TD Supercharged