>> Bob, have reviewed your number again, i'll bet you want 40348A ( not
> 40384A? ). If thats the number, yes, I have the info.
>
> > Subject: Re: XPAG Distributor
> > Date: Monday, March 01, 1999 8:52 PM
> >
> > Bob,
> > Do you have information on the #40384A distributor?
> > Bob
> > (another one)
> >
> > On Mon, 1 Mar 1999 14:54:14 -0500 "Bob and Carolyn Grunau"
> > <cgrunau@pathcom.com> writes:
> > >Steve, I knew that carrot would get a bite!!
> > >Which distributor do you want?
> > >
> > >DISTRIBUT># 40048 40058 40162 40348A
> > >ECMCurve 279 267 279
> > >
> > >run up to= 2600 2500 2600 2200
> > >advance= 14-16 14-16 14-16 11-13
> > >
> > >Int adv1.@ 2000 2000 2000 980
> > >advance = 13-15 12-14 13-15 5-7
> > >
> > >Int adv2 @ 500 800 1000 500
> > >advance= 11/2-31/2 2-5 81/2-101/2 0-2
> > >
> > >No advance 200 400 200 300
> > >below
> > >
> > >Don't ask me why 40048 and 40162 differ at the int 2, maybe we can
> > >just
> > >consider the 1000 rpm advance on 40162 as another intermediate point?
> > >(
> > >Remember they had the same 279 ECM curve).
> > >
> > >All numbers are DISTRIBUTOR speed and advance. Double both for
> > >crankshaft
> > >speed and advance.
> > >The book says"Auto-advance test figures are quoted for DISTRIBUTOR
> > >SHAFT
> > >RPM on DECELERATION"
> > >So there you have it, all, and maybe more, than you ever wanted to
> > >know.
> > >Bob Grunau
> > >
> > >
> > >
> > >
> > >----------
> > >> From: Taylor <TAYLORS@4OAKS.dialnet.com>
> > >> To: cgrunau@pathcom.com
> > >> Subject: Re: XPAG Distributor
> > >> Date: Monday, March 01, 1999 1:32 PM
> > >>
> > >> Bob, you kindly offered the information below for those desperate
> > >enough
> > >to
> > >> need it.
> > >>
> > >> "I do have a Lucas Test Data manual, Publication no. SB222 ( second
> > >> edition), which gives data on distributor advance at various
> > >distributor
> > >> speeds.: ie:
> > >> Full advance/rpm, intermediate 1 advance/rpm, intermediate 2
> > >advance/rpm
> > >> and no advance below rpm.
> > >> This information is available if anyone is desperate for it. "
> > >> Consider me desperate!
> > >> Steve Taylor
> > >>
> > >>
> > >>
> > >
> >
|