Steve,
They run from the carb bowls forward and down toward the forward engine
mounting plate. After passing over it, they then bend to straight down,
and are clamped my a little "M" shaped piece that has a bolt through
the middle. If you see an empty hole in the plate, one that appears to
accept about a 3/16" bolt (but it's the ww size, of course) that's the
hole.
Bob
On Thu, 30 Apr 1998 08:31:03 -0400 Steven Tritle <stritle@epix.net>
writes:
>Is there a clamp to hold the carb overflow tubes to the frame or do
>they
>simply "hang free"?
>Steve
>52 TD
>
>
|