Gentlemen,
In securing my trafficators, I have run into an issue where I need help.
1. Both my trafficators and the supporting housings are reproductions. I
find no way to attach the two... and assume I'll have to drill and tap the
trafficator body and drill appropriate mounting hole(s) in the housings.
Another option would be to epoxy small bolts to the trafficator, then drill
housing and secure with appropriate nuts on outside but am concerned about
permanency of epoxy.
I do find a small pin on the top of the unit which appears to act as a
locator pin into the housing. It doesn't quite fit but I can ream hole to fit.
Other than that, I don't see what holds the two together.
Does anyone have one out of his car and could send me a photo or two? Am I
missing something?
Thanks
Don B.
PA 1823
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|