In a message dated 1/29/02 18:04:52 Pacific Standard Time, mgtom@bright.net
writes:
<< RJF2 Type L 10
> 337571
> 12V ER 10 34
> (assuming serial #, 12 volt made October of 1934)? >>
The RJF (also used on my SA) should have two coils....one is the regulator
and the other is the cutout. You must use this on a two brush dynamo.....if
you have a 3 brush, it can be converted to two brush. A simple 20 amp diode
in series with the cutout would be a worthwhile addition. That way if the
cutout sticks, you won't burn up your dynamo while its trying to motor.
Don, is your RJF2 a brown bakelite? If so, you are lucky.......CJF's are
going for over 200 ukp at present, if you can find one!
Terry
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|