mg-mmm
[Top] [All Lists]

Fw: P/N Driven Plates.

To: <mg-mmm@autox.team.net>
Subject: Fw: P/N Driven Plates.
From: "Brian Rainbow" <brian@brianjrainbow.free-online.co.uk>
Date: Wed, 16 Jan 2002 20:04:40 -0000
Reply-to: "Brian Rainbow" <brian@brianjrainbow.free-online.co.uk>
Sender: owner-mg-mmm@autox.team.net
Pip,
       do you have a copy of M.G Road Cars Volume One - Four Cylinder OHC
1929-1936, if so look at page 154 there is a copy of Service Information
Sheet No 24 - Clutch Modifications, It shows diagrams and measurements for
the early and later modified clutch driven plate.  I would scan it in and
send it to you but my scanner is playing up at present...
Best wishes, Brian Rainbow  Leamington Spa, U.K.    PA0777 and TA2551
-----Original Message-----
From: Kellmg@aol.com <Kellmg@aol.com>
To: mg-mmm@autox.team.net <mg-mmm@autox.team.net>
Date: 16 January 2002 17:04
Subject: P/N Driven Plates.


>Now, guys, your help please.
>
>P's & N's used tyo different clutch driven plates.  Can any one give me
>a
>thickness measurement on either or both.  Worn plate will do.
>
>====================
>Pip,
>
>
>Blower shows,
>
>Pressure plate  25/32" with Driven Plate 10/32"
>
>Pressure Plate  27/32" with Driven Plate   1/4"
>
>
>Brian Kelly.
>
>///  unsubscribe/change address requests to majordomo@autox.team.net  or
try
>///  http://www.team.net/cgi-bin/majorcool
>///  http://www.team.net/mailman/listinfo
>///  Archives at http://www.team.net/archive/mg-mmm
>///  Send list postings to mg-mmm@autox.team.net

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>