Mike,
My driver's harness is hooked to the roll cage braces and the
frame......yours is hooked to the seat?????? Should be hooked to the
frame or crossmember. If all that goes in different directions, no
amount of safety equipment is going to save you.
Skip
At 12:49 PM 9/5/2008, MEIERLE Mike wrote:
>Don't like the idea of hooking my head the roll cage and the rest to the
>seat. The two might go in different directions....IMHO
>
>Mike Meierle
>Alcatel-Lucent
>Sr. Systems Engineer
>7751 Windsor Drive
>Dublin, Ohio 43016
>Office: (614) 733-3989
>Fax: (614) 733-3961
>Cell: (614) 284-6229
>
>
>
>-----Original Message-----
>From: land-speed-bounces+mike.meierle=alcatel-lucent.com@autox.team.net
>[mailto:land-speed-bounces+mike.meierle=alcatel-lucent.com@autox.team.ne
>t] On Behalf Of Skip Higginbotham
>Sent: Friday, September 05, 2008 2:16 PM
>To: Bryan Savage; John Romero
>Cc: lsr list autox
>Subject: Re: [Land-speed] Hans Device and Safety
>
>In cars with lateral head restraints (either cage structure or padding),
>Why not attach the forward head restraints to the roll cage instead of
>the HANS and thereby have no HANS to get in the way of egress?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|