You are supposed to put a dead center and driver dog in the chuck end, not
put it in the jaws..
Dave
> -----Original Message-----
> From: owner-land-speed@autox.team.net
> [mailto:owner-land-speed@autox.team.net]On Behalf Of
> Bobbyhotrods@comcast.net
> Sent: Sunday, June 04, 2006 11:53 AM
> To: Landspeed
> Subject: Taper Tech
>
>
> Between the taper talk and the wet weather I turned down an
> alignment tool I needed out of 1" steel rod, using the
> move-the-tailstock method. It went pretty well but the chuck wore
> into the shaft pretty aggressively and required frequent
> tightening, due to the flexing the mis-alignment created. BJ in
> the Bean (very poor amature machinist)
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.1/355 - Release Date: 06/02/2006
|