Russ;
You are right about that-- safety first.
I finally found a reference to the chain-drive LSR car:
http://www.morrigancraftpottery.co.uk/pt3b.htm
"Babs" used a 27 liter aircraft engine-- talk about a big block! After the
accident, they dug a hole in the sand and buried it.
Regards, Neil Tucson, AZ
-----Original Message-----
From: Russel Mack [mailto:rtmack@concentric.net]
Sent: Friday, October 17, 2003 10:44 AM
To: Albaugh, Neil; land-speed@autox.team.net
Subject: RE: rear suspention
Neil:
I hadn't heard the decapitation story-- but I've heard plenty of stories
about maimings and even deaths from broken driveshafts.
The obvious point here is--WHATEVER drivetrain you use-- there is a lot of
potential for mayhem, and the vehicle should have measures designed-in to
protect the driver. Russ, #1226B
-----Original Message-----
From: Albaugh, Neil [mailto:albaugh_neil@ti.com]
Sent: Friday, October 17, 2003 11:06 AM
To: 'Russel Mack'; 'land-speed@autox.team.net'
Subject: RE: rear suspention
Russ;
Didn't a driver get decapitated by a broken chain years ago at Daytona
Beach? Not a pleasant prospect to think what could happen if a chain breaks;
I wonder if a belt drive might be better?
Regards, Neil Tucson, AZ
-----Original Message-----
From: Russel Mack [mailto:rtmack@concentric.net]
Sent: Thursday, October 16, 2003 7:35 AM
To: Albaugh, Neil; land-speed@autox.team.net
Subject: RE: rear suspention
Nobody has mentioned it lately-- but you can completely eliminate this
torque-steer problem with chain (or belt) drive. You still have to make the
chassis stiff enough to keep your sprockets aligned, however. Russ, #1226B
|