Lance;
THAT was some project! Nice craftsmanship.
Regards, Neil Tucson, AZ
-----Original Message-----
From: JOE LANCE [mailto:jolylance@earthlink.net]
Sent: Wednesday, September 24, 2003 4:55 PM
To: ROBERT J HARRY; GEORGE SNYDER; land-speed@autox.team.net; 'Glen
Barrett'; Albaugh, Neil; W S Potter
Subject: Re: Auto Union at Monterey
AUTOWEEK mag had an article about the Autounion Type C V16 1936 Replica a
couple of years ago---it was built by two guys in a small garage in
England---they built the whole thing from the incomplete drawings, obviously
farmed out some of the work, but all the engine parts including the block
casting are new "replicas"---fantastic job.
lance
Subject: Re: Auto Union at Monterey
> Neil,
>
> I spent about an hour in the tent and around the Auto Union area at
> Laguna Seca in 1999. Those cars were pampered no end. They
> practically put on cotton gloves to touch them. The backdrops were
> wonderful and brought the historic nature of the cars to life. A
> memorable experience to have participated in for me. Horrifying to
> think of racing at competitive
speeds
> with no roll cage or helmet. No wonder there are so few of the great
> drivers from that era still living today.
>
> Wes
>
> on 9/24/03 10:30 AM, Albaugh, Neil at albaugh_neil@ti.com wrote:
>
> > Glen;
> >
> > "It was an odd feeling to have everything in the rear of the car as
> > the feeling was much different setting that far forward."
> >
> > You've said pretty much the same thing that was said of the pre- WW
> > II rear-engine Auto-Union Grand Prix cars. The driver sat well
> > forward and there wasn't much in front of him to act as a visual
> > reference.
> >
> > As you can see, most of the 1936 type C was behind the driver:
> > http://goodwood.racesimcentral.com/ajcl02/ajcl020.shtml
> >
> > Here is a photo of their more conventional 1938 LSR streamliner:
> > http://www.tamsoldracecarsite.net/AutoUnion.html
> >
> > Regards, Neil Tucson, AZ
|