I have had the same results, if they do move/rotate, its' less than 1/8
turn from original position....It's just one of those email list arguments
I try to stay out of as the objectionable to me person making the most
adamant arguments seems to be very inflexible, and there are no absolutes
IMHO, when it comes to engines. but it is an interesting subject, so
thought I would ask on the LSR list, cause I sure don't >really< don't want
to get into it on the other list....as the LSR list is pretty evenhanded,
except for the purple suit stuff and the rear steer discussions, of
course......
At 07:56 AM 5/30/2003 -0500, you wrote:
>John, Mine haven't rotated that I know of and I always check on teardown.
>Skip
>
>
>At 07:30 AM 5/30/03 -0500, john robinson wrote:
> >Howdy, another list I'm on has a discussion going on about piston rings
> >rotating. or not. The sources range from WAG to total seal to SAE
> >papers....anybody here got the facts?
> >
> > John Robinson, Mechanician
> > Mechanical Engineering University of Wisconsin
> > 1513 University Ave.
> > Madison, Wi. 53706
> > 608-262-3606
> > Current World Land Speed Record Holder
> > Bonneville Salt Flats
> > H/GCC 92 cu.in. 1980 Dodge Colt
> > 144.396 MPH set 2000
> > MPS-PG 441 c.c. 1967 BSA Victor Motorcycle
> > 95.193 MPH set 2001
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
/// what is needed. It isn't that difficult, folks.
|