land-speed
[Top] [All Lists]

Re: EGT

To: "Jim Dincau" <jdincau@qnet.com>,
Subject: Re: EGT
From: "Richard Fox" <v4gr@rcn.com>
Date: Mon, 17 Mar 2003 14:09:14 -0800
Of course the good thing about EGTs is they give you the chance to back out
of it before it's to late. With the tempsticks you'll have something else
for the postmortem if it leans out.  Rich Fox
----- Original Message -----
From: "Jim Dincau" <jdincau@qnet.com>
To: "land Speed List" <land-speed@autox.team.net>
Sent: Monday, March 17, 2003 11:01 AM
Subject: EGT


> Let me smoke this by the list,
>      Would any useful information be gained by putting temperature
> indicating markings on the outside of the headers close to the flange? In
> heat treat at the old lazy L, we used Tempil chalk sticks that changed
> appearance when reaching a given temperature. They were available in 50
> degree increments from 200 degrees to 1600 degrees. Would there be a
> constant relationship to the EGT?
> Jim in Palmdale

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/land-speed
///  what is needed.  It isn't that difficult, folks.


<Prev in Thread] Current Thread [Next in Thread>