OK then ...the $64 dollar question; where can "we" obtain" obtain this stuf
-considering "we" all live all over the planet... :-)
Really,,,, where might we be able to purchase this stuff. It sounds really
really good! I'd like to try it for my pesky rottenchester 3 deuces that
are forever leakers LOL!
Thanks Neil, "Dirt Track Doug"
****************
From: "Albaugh, Neil" <albaugh_neil@ti.com>
Reply-To: "Albaugh, Neil" <albaugh_neil@ti.com>
To: "'Nafzger'" <nafzger@vtc.net>, "'Terry Hunt'" <guambomb743@msn.com>,
land-speed@autox.team.net
Subject: RE: carb. leak
Date: Wed, 4 Sep 2002 11:07:30 -0500
Howard;
Thanks for the note. I've also used it to seal Corvair cases as well as
pushrod tubes.
We used Hylomar to seal a Hewland transaxle in the McLaren and it was really
great for at-the-track gear swapping. The magnesium case sections separated
easily and the old Hylomar was simply wiped off with MEK-- no scraping. A
little bead of Hylomar was squeezed out of the tube, smeared on the case
flanges with a fingertip, and the cases were bolted together again, leak
tight! The brilliant blue color lets you know where you might have missed a
spot, too.
The stuff was originally developed for Rolls-Royce jet engines, so it is
good stuff.
Regards, Neil Tucson, AZ
-----Original Message-----
From: Nafzger [mailto:nafzger@vtc.net]
Sent: Tuesday, September 03, 2002 6:59 PM
To: Albaugh, Neil; 'Terry Hunt'; land-speed@autox.team.net
Subject: Re: carb. leak
Neil,
Hylomar is what BMW used to use on the pushrod tubes of the "Boxer Twins". I
also successfully used it on Corvair and VW pushrod tubes. Good stuff.
Howard
----- Original Message -----
From: "Albaugh, Neil" <albaugh_neil@ti.com>
To: "'Terry Hunt'" <guambomb743@msn.com>; <land-speed@autox.team.net>
Sent: Tuesday, September 03, 2002 4:49 PM
Subject: RE: carb. leak
> Terry;
>
> I like Hylomar sealant. It is gasoline fuel- proof but it comes off
easily
> with acetone or, better yet-- MEK.
>
> Regards, Neil Tucson, AZ
_________________________________________________________________
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
/// what is needed. It isn't that difficult, folks.
|