Thanks Mike.... Dave Dahlgren had the exact same recommendation.... must be
the Real deal.....
K
----- Original Message -----
From: "Michael L Obrien" <Michael_L_Obrien@raytheon.com>
To: "Keith Turk" <kturk@ala.net>
Sent: Monday, November 19, 2001 7:28 AM
Subject: Re: Engine tools
>
> Hello Keith, my name is Mike OBrien and I have been reading mail from this
> site because of my interest in building a bonneville car.
>
> I thought I might be able to help you a little with precision tool
> selection. There are many foreign made precision tools that work well
>
> for measuring parts and don't cost as much as Starrett. I have a complete
> set of outside Micrometers from 0-1 thru 0-6 that were made in
>
> China and they work fine. Dial calipers, depth mics, snap
gages.........all
> can be had inexpensively. But when you buy a Dial Bore Gage,
>
> I reccommend a Quality (Starret, Mitutoyo, etc) tool with .0001 (one ten
> thousandth) graduations. When checking bearing tolerances
>
> a .001 (one thousandth) is useless. Another thing that many people don't
> realize is that these tools may get out of calibration with use,
>
> so they need to be checked before use. Micing a know standard (gage block
> or ring) is an easy way. When checking rod bearing
>
> clearance, I think the best way is direct reference. I Mic the crank and
> lock the OD micrometer to size. Then I use that mic reading as
>
> a gage and set the dial bore gage. Then when the dial bore gage is
inserted
> into a rod it will tell the difference in size (clearance)
>
> regardless of whether the gage is out of calibration or not. Something
that
> you and some of the other racers might enjoy getting is
>
> a catalog from a company called MSC. It's about the size of a New York
> phone directory (3 1/2") and has great tool selection. I have one
>
> at work and have ordered a lot from it. I have no connection with this
> company, just thought some of the racers might like it. (Free)
>
> Try calling (800)645-7270 or www.mscdirect.com One other thing
> about this company, they are FAST.
>
> Mike
> OBrien
>
>
>
>
>
>
>
>
>
>
> "Keith Turk"
> <kturk@ala.net> To:
<land-speed@autox.team.net>
> Sent by: cc:
> owner-land-speed@auto Subject: Engine tools
> x.team.net
>
>
> 11/16/2001 06:56 PM
> Please respond to
> "Keith Turk"
>
>
>
>
>
>
> Well my Snap on guy was a bit short this year.... did find a Nice Snap- on
> Cam Bearing installer Set.... I had ordered one from Speedway but I
> cancelled it when they put it on back order...So now I have one thats LOTS
> nicer....
>
> I'm missing a couple of pieces I would like to have to freshen my motors
> here at home.... Mostly a Dial bore gage..... I have inside snap mic's
but
> I really want a decent gage type set up. I also need a quality Valve
> Spring
> pressure gage and Height checker... Some where in here I gotta find a
> decent Valve spring compressor to remove them too....
>
> Keith ( hey maybe someone had two of them laying around )
>
>
> ///
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
/// or go to http://www.team.net/cgi-bin/majorcool
///
///
|