Dick,
I just fixed my leak problem around the screws by using 3/4" 10-32
setscrews and JB Weld.
Just mix up the JB, put a little on the end of the setscrew and screw it
in.......leakage is over! (as soon as it sets up)
Oh!, use washers and self locking nuts to secure the discs.
You can also use a little silicone around the screws and nylon washers and
that works too.
Dzus buttons are a better idea!
Skip H
At 04:36 PM 10/16/00 , you wrote:
>I'll be real nice - I'll be real nice, I promise.
> I take back what I said about moving parts and
>low bid contractors and all that. hee hee. I
>sure would appreciate it if you brought that with
>you, it would save me a lot of measuring and
>trial and error. I've got a lead on a lower
>control arm not twenty miles form here, but if
>that doesn't work, I just got off of the phone
>talking to a "certified" welder - who races
>roundy-round, so he appreciates my dilema, and
>even knew right away about cutting and welding to
>change caster. Stess is getting high in my old
>self, but I'm still burning it at both ends to
>make sure I make this meet!
>
>
>--- Keith Turk <kturk@ala.net> wrote:
>> Dick if your Real Nice.... I will bring you an
>> extra Moon disc with the 3
>> duez fasteners holes installed... and the Cut
>> out's for the Tabs.... so you
>> can tack them on... then take off the disc and
>> weld them up... then you can
>> use the Disc to mark where to drill your new
>> Disc's....Brad and I talked
>> about turning several of my old ones into Swap
>> Meet Material.... figure
>> they gotta be worth 10 bucks as Gigs....
>>
>> K
>>
>> ----------
>> > From: Dick J <lsr_man@yahoo.com>
>> > To: Doug Anderson
>> <boogiewoogie12@hotmail.com>; kturk@ala.net;
>> land-speed@autox.team.net
>> > Subject: Little screws and tubless tires
>> > Date: Monday, October 16, 2000 4:03 PM
>> >
>> > Now that I have learned that you can't put
>> moons
>> > on tubless tires/wheels with little screws
>> like
>> > was done on the old 7.50 x 15 skinnies, I'm
>> going
>> > to weld little tabs around the wheel to
>> fasten
>> > the moons. Since I gotta do all that (and I
>> > ain't got time to do it right now), I'll
>> order
>> > some more dzues fasteners and do it that way
>> > during the winter revitalization months. It
>> seems
>> > like a good winter project anyhow!
>> >
>> >
>>
>__________________________________________________
>> > Yahoo! Messenger - Talk while you surf! It's
>> FREE.
>> > http://im.yahoo.com/
>
>
>=====
>* * * * * * * * * * * * * *
>* Dick J *
>* (In East Texas) *
>* # 729 *
>* C/GRS C/FRS D/STR *
>* * * * * * * * * * * * * *
>
>__________________________________________________
>Yahoo! Messenger - Talk while you surf! It's FREE.
>http://im.yahoo.com/
|