Or, if you don't make it to Maxton, or keith decides you are not "real nice"
Moon will "lend" you a template with the purchase of one of their dzus kits -
same as Keith described.
Ed
Keith Turk wrote:
> Dick if your Real Nice.... I will bring you an extra Moon disc with the 3
> duez fasteners holes installed... and the Cut out's for the Tabs.... so you
> can tack them on... then take off the disc and weld them up... then you can
> use the Disc to mark where to drill your new Disc's....Brad and I talked
> about turning several of my old ones into Swap Meet Material.... figure
> they gotta be worth 10 bucks as Gigs....
>
> K
>
> ----------
> > From: Dick J <lsr_man@yahoo.com>
> > To: Doug Anderson <boogiewoogie12@hotmail.com>; kturk@ala.net;
> land-speed@autox.team.net
> > Subject: Little screws and tubless tires
> > Date: Monday, October 16, 2000 4:03 PM
> >
> > Now that I have learned that you can't put moons
> > on tubless tires/wheels with little screws like
> > was done on the old 7.50 x 15 skinnies, I'm going
> > to weld little tabs around the wheel to fasten
> > the moons. Since I gotta do all that (and I
> > ain't got time to do it right now), I'll order
> > some more dzues fasteners and do it that way
> > during the winter revitalization months. It seems
> > like a good winter project anyhow!
> >
> > __________________________________________________
> > Yahoo! Messenger - Talk while you surf! It's FREE.
> > http://im.yahoo.com/
|