land-speed
[Top] [All Lists]

Re: rollcage again

To: "Lawrence E. & Cathy R. Mayfield" <lemay@hiwaay.net>
Subject: Re: rollcage again
From: "Dan Warner" <dwarner@electrorent.com>
Date: Fri, 4 Feb 2000 04:28:07 -0800
Mayf,

You didn't read far enough - Section III.2.2 address ROLLCAGES, in your
application i.e. open car, Section III.2 - 2nd sentence you need to use a
cage vrs. rollbar.

Dan W
----- Original Message -----
From: Lawrence E. & Cathy R. Mayfield <lemay@hiwaay.net>
To: <V4GR@aol.com>; <saltracer@netscape.net>; <land-speed@autox.team.net>
Sent: Thursday, February 03, 2000 1:40 AM
Subject: Re: rollcage again


> Holey Smokes! Did the rule book change? I don't have the 2000 one but the
> '99 one under III-2.2 says 1 5/8 minimum wall 0.120. Says for classes G H
I
> J K can use 1 1/2 x 0.095 wall. Classes whhich exceed 175 must use the
> larger tube minimum requirements.
>
> Now roll bars are diffeerent..
>
> mayf ( I hope I am not screwed up!!)
>
>
> At 10:53 AM 2/3/00 EST, V4GR@aol.com wrote:
> >Phil; All you need is seamless mild steel, but why go with 1 5/8 dia. 1
3/4
> >can't be that much more and if you ever get fast enough or run in F class
> you
> >will need 1 3/4. I know, I'm looking at major redo on my roll cage in
> >roadster if I want to install 3 liter Nissan.  Rich Fox
> >
> >
>
>
>
> L.E. Mayfield
> 124 Maximillion Drive
> Madison, Al. 35758-8171
> ph: 1-256-837-1051
>
> http://home.hiwaay.net/~lemayf
>
> lemay@hiwaay.net
>
> Sunbeam Tiger, B9471136
> Sunbeam Alpine Bonneville Land Speed Racer,
> '66 Hydroplane Drag Boat (390 FE)
>


<Prev in Thread] Current Thread [Next in Thread>