Bob:
I have installed a silicone gasket and still fuel enters the boot. What is
this white plastic sleeve?
Bob Begani
-----Original Message-----
From: Healeys <healeys-bounces@autox.team.net> On Behalf Of Bob Haskell
Sent: Thursday, December 31, 2020 8:15 PM
To: John Spaur <jmsdarch@sbcglobal.net>; 'Healey List'
<healeys@autox.team.net>
Subject: Re: [Healeys] Fuel sender leak
John,
If you take the nuts and the heavy paper insulation off the screw, you'll
see the screw goes through a white plastic sleeve that isolates the screw
from the body of the sending unit. The sleeve also holds the ground wire in
place - there's a groove along the bottom of the hole in the body that the
ground wire sits in. The sleeve provides the seal. Don't twist the screw -
the lead to the wound resistor is soldered to the screw.
Cheers,
Bob Haskell
Austin Healey 3000 BN7/BT7 registrar
On 12/31/20 7:14 PM, John Spaur wrote:
>
> I noticed the smell of petrol in the healey boot. I think it is coming
> from the sender electrical post connection. What are people using to
> seal that?
>
> John Spaur
>
> ?62 BT7
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual
> donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>
_______________________________________________
$12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/rfbegani@gmail.com
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
ox.team.net
|