Yup.? Doesn't get that far together.
On 2/20/2018 7:14 PM, John Spaur wrote:
> I presume you have wired the pump valve plunger up so it clears the cam on
> the main shaft.
>
> John
>
> -----Original Message-----
> From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob
> Spidell
> Sent: Tuesday, February 20, 2018 9:08 AM
> To: Healeys <healeys at autox.team.net>
> Subject: [Healeys] Mating OD to gearbox
>
> Folks,
>
> I've successfully (hopefully) rebuilt and upgraded my OD and gearbox, but
> can't seem to get them to, uh, mate properly. I had aligned the splines in
> the rear of the OD with my mainshaft before assembling the gearbox, but even
> then they didn't want to merge and, of course, after several tries the
> splines became misaligned (and I don't have a much-desired spare mainshaft).
> I've done my best to get the splines aligned by prodding with a screwdriver
> but, even with them visibly aligned the two won't slip together. I tried
> dozens of test fittings, and got them to join one time, but didn't have the
> pump can or gasket installed, so that was for naught. Any suggestions?
>
> TIA,
>
> Bob
>
>
>
>
|