healeys
[Top] [All Lists]

Re: [Healeys] Helicoils in SU carbs

To: Bob Spidell <bspidell@comcast.net>
Subject: Re: [Healeys] Helicoils in SU carbs
From: Fred Wescoe <fredwescoe@gmail.com>
Date: Fri, 23 Sep 2016 10:48:41 -0400
Cc: healeys <Healeys@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <8BEF3B53-99C5-440E-99F2-5E80DFE6878F@mac.com> <1187769124.4598160.1474640229203.JavaMail.zimbra@comcast.net>
--===============0586160441806208591==

--001a113d424ee38ed3053d2ddfe1

Lin,

On my BJ7, I simply ran a tap thru the hole to create threads in the body.
I measured the original hole size with a drill until I found one that would
not pass thru.  One fraction size larger worked for me.  Then I used 2
bolts on each carb that matched the tap size.

Keep it simple.

Fred
66 BJ8



On Fri, Sep 23, 2016 at 10:17 AM, Bob Spidell <bspidell@comcast.net> wrote:

> I think it would depend entirely on the size of bolt you would use.   Note
> the coil kits usually don't come with the drill bit you need to oversize
> the holes before tapping for the coil, and it's usually some oddball 64ths
> size.
>
> FWIW, it sounds like a good idea as I have K&N filters on my BJ8, and they
> are indeed a PITA to install (unfortunately, I'd still have to deal with
> the stupid little acorn nuts on the outer side of the filters).
>
> Bob
>
> ------------------------------
> *From: *"Linwood Rose" <linwoodrose@mac.com>
> *To: *"healeylist" <Healeys@autox.team.net>
> *Sent: *Friday, September 23, 2016 3:50:30 AM
> *Subject: *[Healeys] Helicoils in SU carbs
>
> Who has used helicoils in their carb bodies so one doesn't have to put
> nuts on the back of the carbs when installing K&N or other air cleaners?
> Fiddling with the bolt head or nut from the back side of the carb is a
> pain. I believe I have read that some have used helicoils in the carb so
> solve this problem.
>
> What size helicoil is used? In my case I am using HD6 carbs if that
> matters.
>
> Thank you!
>
> Lin
>
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/fredwescoe@gmail.com
>
>
>

--001a113d424ee38ed3053d2ddfe1
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr"><div><div><div><div>Lin,<br><br></div>On my BJ7, I simply =
ran a tap thru the hole to create threads in the body.=C2=A0 I measured the=
 original hole size with a drill until I found one that would not pass thru=
.=C2=A0 One fraction size larger worked for me.=C2=A0 Then I used 2 bolts o=
n each carb that matched the tap size.=C2=A0 <br><br></div>Keep it simple.<=
br><br></div>Fred<br></div>66 BJ8<br><div><div><div><div><div><br><br></div=
></div></div></div></div></div><div class=3D"gmail_extra"><br><div class=3D=
"gmail_quote">On Fri, Sep 23, 2016 at 10:17 AM, Bob Spidell <span dir=3D"lt=
r">&lt;<a href=3D"mailto:bspidell@comcast.net"; target=3D"_blank">bspidell@c=
omcast.net</a>&gt;</span> wrote:<br><blockquote class=3D"gmail_quote" style=
=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><di=
v style=3D"font-family:Arial;font-size:12pt;color:#000000"><div>I think it =
would depend entirely on the size of bolt you would use. =C2=A0 Note the co=
il kits usually don&#39;t come with the drill bit you need to oversize the =
holes before tapping for the coil, and it&#39;s usually some oddball 64ths =
size.</div><div><br></div><div>FWIW, it sounds like a good idea as I have K=
&amp;N filters on my BJ8, and they are indeed a PITA to install (unfortunat=
ely, I&#39;d still have to deal with the stupid little acorn nuts on the ou=
ter side of the filters).</div><div><br></div><div>Bob</div><div><br></div>=
<hr><div style=3D"color:#000;font-weight:normal;font-style:normal;text-deco=
ration:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt"><b>From:=
 </b>&quot;Linwood Rose&quot; &lt;<a href=3D"mailto:linwoodrose@mac.com"; ta=
rget=3D"_blank">linwoodrose@mac.com</a>&gt;<br><b>To: </b>&quot;healeylist&=
quot; &lt;<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank">Heale=
ys@autox.team.net</a>&gt;<br><b>Sent: </b>Friday, September 23, 2016 3:50:3=
0 AM<br><b>Subject: </b>[Healeys] Helicoils in SU carbs<span class=3D""><br=
><div><br></div>Who has used helicoils in their carb bodies so one doesn&#3=
9;t have to put nuts on the back of the carbs when installing K&amp;N or ot=
her air cleaners? Fiddling with the bolt head or nut from the back side of =
the carb is a pain. I believe I have read that some have used helicoils in =
the carb so solve this problem.<br><div><br></div>What size helicoil is use=
d? In my case I am using HD6 carbs if that matters.<br><div><br></div>Thank=
 you!<br><div><br></div>Lin<br><div><br></div><br><div><br></div></span></d=
iv><div><br></div></div></div><br>______________________________<wbr>______=
___________<br>
rer" target=3D"_blank">http://www.team.net/donate.<wbr>html</a><br>
Archive: <a href=3D"http://www.team.net/archive"; rel=3D"noreferrer" target=
=3D"_blank">http://www.team.net/archive</a><br>
Forums: <a href=3D"http://www.team.net/forums"; rel=3D"noreferrer" target=3D=
"_blank">http://www.team.net/forums</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net";>Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r" target=3D"_blank">http://autox.team.net/mailman/<wbr>listinfo/healeys</a=
><br>
<br>
s/fredwescoe@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.t=
eam.net/mailman/<wbr>options/healeys/fredwescoe@<wbr>gmail.com</a><br>
<br>
<br></blockquote></div><br></div>

--001a113d424ee38ed3053d2ddfe1--

--===============0586160441806208591==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys



--===============0586160441806208591==--

<Prev in Thread] Current Thread [Next in Thread>