This is a multi-part message in MIME format.
--===============2458868086507778333==
boundary="------------020004020807000307010704"
This is a multi-part message in MIME format.
--------------020004020807000307010704
Content-Transfer-Encoding: 7bit
Start the engine and let it idle until warm or drive a few miles to that
purpose.
Set the idling speed at around 800-900rpm.
Set the dial to the required advance at idling with the vacuum line
attached (see your workshop manual). Connect up to the battery and
position the clamp on Nr.1 plug lead.
Loosen the distributor clamp.
Set the distributor to TDC on the marks.
Tighten the clamp, not to tight.
Recheck.
It is that simple.
WATCH OUT though for moving parts like the fan and water pump/dynamo
pulleys/belts.
Kees Oudesluijs
Mitch schreef op 5-7-2015 om 15:51:
> Hello ,
> I have a 1966 bj8.......I have just replaced my original Lucas
> distributer with a new Pertronics distributer .........I turned the
> engine until the pointer was on the tdc mark on the pulley (on the
> compression stroke) and put the rotor pointing at the #1 spark plug in
> the dist. cap................NOW what do I do? I have a timing light
> with the degree dial on the back,...............what are the next
> steps to set the timing correctly?? do I plug the vacuum, what
> degrees,do I have to start the engine???
> etc.................................sorry for all the questions
> Mitch
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com <http://www.avg.com>
> Versie: 2015.0.6081 / Virusdatabase: 4392/10164 - datum van uitgifte:
> 07/05/15
>
--------------020004020807000307010704
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix"><br>
Start the engine and let it idle until warm or drive a few miles
to that purpose.<br>
Set the idling speed at around 800-900rpm.<br>
Set the dial to the required advance at idling with the vacuum
line attached (see your workshop manual). Connect up to the
battery and position the clamp on Nr.1 plug lead.<br>
Loosen the distributor clamp.<br>
Set the distributor to TDC on the marks.<br>
Tighten the clamp, not to tight.<br>
Recheck.<br>
It is that simple.<br>
<br>
WATCH OUT though for moving parts like the fan and water
pump/dynamo pulleys/belts.<br>
Kees Oudesluijs<br>
<br>
<br>
<br>
Mitch schreef op 5-7-2015 om 15:51:<br>
</div>
<blockquote
cite="mid:237588308.8793043.1436104295976.JavaMail.zimbra@comcast.net"
type="cite">
<meta http-equiv="Context-Type" content="text/html; charset=utf-8">
<div>
<div>Hello ,</div>
<div>Â </div>
<div>I have a 1966 bj8.......I have just replaced my original
Lucas distributer with a new Pertronics distributer .........I
turned the engine until the pointer was on the tdc mark on the
pulley (on the compression stroke) and put the rotor pointing
at the #1 spark plug in the dist. cap................NOW what
do I do? I have a timing light with the degree dial on the
back,...............what are the next steps to set the timing
correctly?? do I plug the vacuum, what degrees,do I have to
start the engine??? etc.................................sorry
for all the questions</div>
<div>Â </div>
<div>Mitch</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Archive: <a class="moz-txt-link-freetext"
href="http://www.team.net/archive";>http://www.team.net/archive</a>
Forums: <a class="moz-txt-link-freetext"
href="http://www.team.net/forums";>http://www.team.net/forums</a>
<a class="moz-txt-link-abbreviated"
href="mailto:Healeys@autox.team.net";>Healeys@autox.team.net</a>
<a class="moz-txt-link-freetext"
href="http://autox.team.net/mailman/listinfo/healeys";>http://autox.team.net/mailman/listinfo/healeys</a>
</pre>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<meta http-equiv="Context-Type" content="text/html; charset=utf-8">
<p class="">Geen virus gevonden in dit bericht.<br>
Gecontroleerd door AVG - <a moz-do-not-send="true"
href="http://www.avg.com";>www.avg.com</a><br>
Versie: 2015.0.6081 / Virusdatabase: 4392/10164 - datum van
uitgifte: 07/05/15</p>
</blockquote>
<br>
</body>
</html>
--------------020004020807000307010704--
--===============2458868086507778333==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============2458868086507778333==--
|