John, I never was able to get the piping to stay in place without removing
the aluminum finisher and gluing the piping to the finisher with contact
cement.
Cut "darts" (V-shaped cuts) in the flat part of the piping so it forms into
a curve easier.
Steve Byers
HBJ8L/36666
BJ8 Registry
AHCA Delegate at Large
Havelock, NC USA
-----Original Message-----
From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of JOHN BAHE
SR
Sent: Saturday, July 19, 2014 9:27 AM
To: healeys@autox.team.net
Subject: [Healeys] vinyl piping
Anyone have an easy way or best method to install the piping on the
aluminum door finisher that attaches to the shut pillar? Do you have to
remove the trim or can you install with the trim attached but loose? Any
suggestions are appreciated.
Thanks,
John A Bahe Sr.
johnbahesr@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|