healeys
[Top] [All Lists]

Re: [Healeys] vinyl piping

To: JOHN BAHE SR <johnbahesr@gmail.com>, healeys@autox.team.net
Subject: Re: [Healeys] vinyl piping
From: Bob Spidell <bspidell@comcast.net>
Date: Sat, 19 Jul 2014 06:33:20 -0700
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <CACCi48S4=Nc1ZHLkBZ+1Y=Kc2A1zHu-o4SHc41udZEnsVWA=Gw@mail.gmail.com> s=q20140121; t=1405776802; bh=lzqW2up8+A9rEGrZ0yvfbGcKDH8lw00qo0uPl+JczM8=; h=Received:Received:Message-ID:Date:From:MIME-Version:To:Subject: Content-Type; b=d2nb2t0W/o/Y2Xncqg16pzBf5bUdVcRAVKQWKUlu8TuelR2EPrB88JJ4RZ8QoH2WX 3LH/1aaZz+IKJtFgNLBM58KFuk28xVgQJf/CLVPvi3q5Zxghwmz13Wf8CKO7bTUtFy MqOjWB+ayDPwh3en2zKs2Z5bYW4D8qANdufYkV9yc4bahtTEDaHv0iXug0uE0gQTQv 47jwN17mYcM7vninES7kG7lBA/CHScSrmRaeT8XQtRurJzuAU7F3AtHCc6S33/ogjO fcobftU0lVuJ9vRGcrWCr1SxD8jk3UdiG4TMFpKIB9wJDOR6M0+hOfX9429wL2ihic COL98fUC7gnjg==
User-agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0
Been a while since I did this, but think you can just loosen all the Al door 
finisher screws, remove one screw at a 
time, work the piping--flat part--into the gap, punch a hole, replace that 
screw and move to the next.

Bob


On 7/19/2014 6:27 AM, JOHN BAHE SR wrote:
> Anyone have an easy way or  best method to install the piping on the
> aluminum door finisher that attaches to the shut pillar?   Do you have to
> remove the trim or can you install with the trim attached but loose?  Any
> suggestions are appreciated.
>
> Thanks,
> John A Bahe Sr.
> johnbahesr@gmail.com
> _______________________________________________
>
>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell@comcast.net

*******************************************************************
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>