To: | healeyguy@aol.com, healeys@autox.team.net |
---|---|
Subject: | Re: [Healeys] Clutch/Release/Pressure Plate Questions <mailto:healeys-request@autox.team.net?subject=unsubscribe> <mailto:healeys-request@autox.team.net?subject=subscribe> |
From: | warthodson@aol.com |
Date: | Fri, 7 Sep 2012 14:21:57 -0400 (EDT) |
Delivered-to: | healeys-archive@autox.team.net |
Delivered-to: | healeys@autox.team.net |
References: | <5891B364A7C3594B9466304B59E65B1C40E0A8AF@ex1mbx02.onthenetoffice.com> <504924D7.4060003@bredband.net> <CAFBXTkL0XbfQbhO+FXEVjt0UyxDz4PD2ApwhxthAKvKcpqSXog@mail.gmail.com> <5049AD2C.909@bredband.net> <8CF5B0941BAB1E7-F98-2781E@Webmail-m111.sysops.aol.com> <8CF5B31EDB764B0-978-28627@Webmail-m121.sysops.aol.com> |
So now I am re-confused. This seems to indicate that there are three different pressure plate bolt patterns as follows: 1. BN1/ BN2/BN4/BN6 (9" diameter) with 2 alignment dowels 2. BN7/BT7/BJ7 up to 29F-H4878 (10" diameter) with 2 alignment dowels 3. BJ7 from 29F-H4879/BJ8 (9.5" diameter) with 3 alignment dowels Correct? Gary From: healeyguy BN1 and 2 has their own flywheel. Read "really heavy!" Bolt pattern for crank flange same as six cylinder cars. 100 three finger nine inch diameter pressure plate bolt and two alignment dowels have same pattern as BN4/BN6. BN7, BT7 anf BJ7 to 29F-H4878 uses three finger ten inch plate and bolts, Pressure plate bolt and 2 dowel pattern are different. It just bigger. BJ7 from 29F-H4879 and BJ8 uses 9 1/2 inch diaphragm pressure plate with three alignment dowels. Your car may differ depending on what the previous owner has done. Aloha Perry _______________________________________________ Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys@autox.team.net http://autox.team.net/mailman/listinfo/healeys |
Previous by Date: | Re: [Healeys] Clutch/Release/Pressure Plate Questions, healeyguy |
---|---|
Next by Date: | Re: [Healeys] Clutch/Release/Pressure Plate Questions, warthodson |
Previous by Thread: | Re: [Healeys] Clutch/Release/Pressure Plate Questions <mailto:healeys-request@autox.team.net?subject=unsubscribe> <mailto:healeys-request@autox.team.net?subject=subscribe>, healeyguy |
Next by Thread: | Re: [Healeys] Clutch/Release/Pressure Plate Questions <mailto:healeys-request@autox.team.net?subject=unsubscribe> <mailto:healeys-request@autox.team.net?subject=subscribe>, Per Schoerner |
Indexes: | [Date] [Thread] [Top] [All Lists] |