Bob--
You don't say if you have a solid state ignition but assuming you do not
and Jeff has okayed the distributor I would be checking the coil as well as
the integrity of connections to it. Also carefully inspect the leads from
the disty to the plugs. Please come back and keep us apprised of your
progress.
Best--Michael Oritt
On Sun, Nov 20, 2011 at 6:26 AM, Bob Abbott <thehealeyguy at gmail.com> wrote:
> I need the group'.s help with a problem that has me stumped. Car is a 100 -
> completely restored. Not 100 miles on it. Everything new during the
> restoration.
> Starts fine, runs smoothly, until it warms up. It then begins to miss and
> buck. Its worse on acceleration but you don't need to be hard on the
> throttle for it to happen. Replaced the new fuel pump with another bran-new
> one. Sent the distributor back to Jeff to have him check his
> rebuild.Checked mixture, timing,float bowl level, etc. and all seem to be
> spot on. I'm at a loss as to what to look for next. Any and all ideas will
> be followed up
> Bob
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michael.oritt at gmail.com
|