I replaced the choke cables with teflon-lined bicycle cable housings
substituting the original solid wires for the multi-
strand bicycle cables.
Installed set screws at front and back of each cable which hold the housings in
place when the cable is operated.
Therefore when the choke is pushed in, the levers are fully seated. No extra
springs necessary.
--
Steve Gerow
Altadena, CA
Modified BN6 / 29D engine
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|