Just got an email from a fenders saying Moss had a recall on some master
cal. Don't know any more than that. If you have a Moss unit. Contact them.
On Aug 7, 2011 5:50 PM, "Ron Ray" <ronald-ray@sbcglobal.net> wrote:
> Folks,
>
> After rebuilding the hydraulic system the front brakes do not release. If
> the bleed screw is loosened, they do release.
> The rear brakes do not lock up
>
> All rubber hoses were replaced.
> All original steel brake lines were clean with air pressure.
> The connector valve on the passenger side was removed and cleaned with air
> pressure.
> The caliber pistons can be moved by hand when they are off the car.
>
> When the front brakes lock up, the master cylinder piston does not return
to
> the full "forward:" position.
>
> Any suggestions would be greatly appreciated.
>
> Thanks
> Ron
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|